China Professional ISO, DIN ISO Approved Ccr or Private Label Cardan Shaft Transmission Joint

Product Description

      ABS Ring Included: No

Axle Nut Locking Type: Self Lock

Axle Nut Supplied: Yes

Compressed Length: 21 1/4″

CV Axles Inboard Spline Count: 26

Emission Code : 1

Inboard Joint Type: Female

Input Shaft Connection Style: Spline

Input Shaft Spline Count: 26

Interchange Part Number: , GM-8047, 179047, GM-6120, GM6120, 9456N

Label Description – 80: New Constant Velocity Drive Axle

Length Measurement Method: Compressed

Life Cycle Status Code: 2

Life Cycle Status Description: Available to Order

Maximum Cases per Pallet Layer: 10

MSDS Required Flag: N

National Popularity Code : B

National Popularity Description: Next 20% of Product Group Sales Value

New or Remanufactured: New

Nut Head Size: 36mm Hex Head

Nut Length: OAH 20.8mm

Nut Locking Type: Self Lock

Nut Thread Size: M24 x 2.0

Other Part Number: 815-5270, GM-8232, 80-1507, , 80571

Outboard Joint Type: Male

Outboard Spline Count: 27

Output Shaft Connection Style: Spline

Output Shaft Spline Count: 27

Overall Length: 21 1/4″

Pallet Layer Maximum: 6

Product Condition: New

Product Description – Invoice – 40: CV Drive Axle New

Product Description – Long – 80: CV Drive Axle – Domestic New

Product Description – Short – 20: CV Drive Axle

Remanufactured Part: N

Spindle Nut Hex Head Size: 36mm

Spindle Nut Included: Yes

Spindle Nut Thread Size: M24 x 2.0

Drive Shaft | PATRON : PDS1507

  • Fitting Position: Front Axle Right

REF NO.

FactoryNumber

GSP208050

OE Number

MakeNumber

GMC93720063

MakeNumber

GMC

MakeNumber

CHINAMFG

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Available
Condition: New
Certification: DIN, ISO, ISO, DIN
Type: C.V. Joint
Application Brand: GM
Material: Steel
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

cardan shaft

What is the role of needle bearings in a cardan joint?

Needle bearings play a crucial role in the smooth operation and performance of a cardan joint. They are commonly used as a type of rolling element bearing within the joint’s design. The primary role of needle bearings in a cardan joint is to provide support, reduce friction, and facilitate the transmission of torque between the joint’s components. Here’s a detailed explanation of the role of needle bearings in a cardan joint:

  1. Load Distribution: Needle bearings are designed to distribute loads evenly across their cylindrical rolling elements. In a cardan joint, they help distribute the axial and radial loads between the input and output shafts, yokes, and cross members. This load distribution capability helps minimize stress concentrations and ensures efficient torque transmission.
  2. Reduced Friction: The rolling motion of the needle bearings reduces the friction between the joint’s components. By reducing friction, needle bearings help minimize power losses and energy consumption within the cardan joint. This is particularly important in applications where efficiency and power transmission are critical.
  3. Misalignment Compensation: Cardan joints are designed to accommodate misalignments between the input and output shafts. Needle bearings allow a certain degree of misalignment while maintaining smooth rotation and torque transmission. Their design and arrangement provide flexibility and allow for angular, parallel, and axial misalignment compensation.
  4. High Load Capacity: Needle bearings are specially designed to handle high radial and axial loads. In a cardan joint, they are subjected to varying loads and torque forces. The robust construction of needle bearings enables them to withstand these loads while maintaining their structural integrity and performance.
  5. Compact Design: Needle bearings offer a high load capacity relative to their size, allowing for a more compact cardan joint design. Their small size and high load-carrying capability make them well-suited for applications with limited space or weight constraints.
  6. Reduced Wear and Longevity: Needle bearings are designed to have high wear resistance and durability. Their rolling motion reduces the sliding contact between the joint’s components, minimizing wear and extending the joint’s service life. This is particularly important in high-speed or high-load applications where wear can lead to premature failure.
  7. Operating Conditions: Needle bearings are designed to operate in a variety of conditions, including high-speed and high-temperature environments. They are often manufactured with high-quality materials and heat treatments to enhance their performance and reliability, making them suitable for demanding operating conditions commonly encountered in cardan joint applications.

Overall, needle bearings play a critical role in the functionality, efficiency, and longevity of a cardan joint. By providing load distribution, reduced friction, misalignment compensation, and high load capacity, they contribute to the smooth operation and reliable torque transmission of the joint. Proper selection, lubrication, and maintenance of needle bearings are essential to ensure optimal performance and maximize the lifespan of the cardan joint.

cardan shaft

How do you address thermal expansion and contraction in a cardan joint?

Addressing thermal expansion and contraction in a cardan joint requires careful consideration of the materials used, proper design techniques, and appropriate installation practices. By implementing strategies to accommodate thermal variations, the integrity and performance of the cardan joint can be maintained. Here’s a detailed explanation:

1. Material Selection: Choose materials for the cardan joint components that have compatible coefficients of thermal expansion. This helps to minimize the differential expansion and contraction rates between the connected parts. Selecting materials with similar thermal expansion characteristics reduces the potential for excessive stress, deformation, or binding of the joint during temperature fluctuations.

2. Clearance and Tolerance Design: Incorporate appropriate clearances and tolerances in the design of the cardan joint. Allow for slight axial or radial movement between the joint components to accommodate thermal expansion and contraction. The clearances should be designed to prevent binding or interference while maintaining proper functionality and torque transmission.

3. Lubrication: Apply suitable lubrication to the cardan joint components to minimize friction and wear. Lubrication helps to reduce the effects of thermal expansion by providing a thin film between the moving parts. The lubricant should have a high operating temperature range and maintain its properties under thermal stress.

4. Temperature Monitoring: Implement temperature monitoring systems to track the operating temperatures of the cardan joint. This allows for real-time monitoring of temperature variations and helps identify potential issues related to thermal expansion or contraction. Monitoring can be done using temperature sensors or thermal imaging techniques.

5. Installation and Preload: Pay attention to the installation process of the cardan joint. Ensure that the joint is installed with appropriate preload or axial play to allow for thermal expansion and contraction without causing excessive stress or binding. Preload should be adjusted to accommodate the expected temperature range and thermal expansion coefficients of the materials used.

6. Heat Dissipation: Consider heat dissipation mechanisms in the vicinity of the cardan joint. Proper cooling or ventilation systems can help dissipate excess heat generated during operation, minimizing temperature differentials and reducing the impact of thermal expansion and contraction on the joint.

7. Thermal Shields or Insulation: In applications where extreme temperature differentials are anticipated, thermal shields or insulation materials can be employed to limit heat transfer to the cardan joint. By reducing direct exposure to high temperatures or rapid temperature changes, the effects of thermal expansion and contraction can be mitigated.

8. System Testing and Analysis: Conduct thorough testing and analysis to assess the performance of the cardan joint under varying temperature conditions. This includes evaluating the joint’s response to thermal expansion and contraction, measuring clearances, torque transmission efficiency, and any potential issues related to temperature differentials. Testing can be done through simulation, laboratory experiments, or field trials.

By considering these strategies, thermal expansion and contraction can be addressed in a cardan joint, minimizing the risk of damage, binding, or compromised performance. It is important to evaluate the specific operating conditions, temperature ranges, and materials used in the cardan joint to determine the most appropriate approaches for addressing thermal variations.

cardan shaft

Can you explain the purpose of a cardan joint in a drive shaft?

A cardan joint, also known as a universal joint or U-joint, serves a crucial purpose in a drive shaft. The drive shaft is responsible for transmitting rotational motion and torque from the engine or power source to the wheels or driven components. Here’s a detailed explanation of the purpose of a cardan joint in a drive shaft:

A drive shaft is a mechanical component that connects the output of the engine or power source to the wheels or driven components of a vehicle or machinery. It is typically a tubular shaft that rotates at high speeds and transmits the torque generated by the engine to propel the vehicle or operate the machinery. The drive shaft needs to accommodate various factors, including changes in distance, misalignment, and different angles between the engine and the wheels or driven components.

This is where the cardan joint comes into play. The cardan joint is located at each end of the drive shaft, connecting it to the engine or power source and the wheels or driven components. The purpose of the cardan joint is to allow the drive shaft to transmit rotational motion and torque while accommodating the misalignment and changes in angles that occur between these components.

When the engine or power source rotates, it generates rotational motion and torque. The cardan joint at the engine end of the drive shaft receives this rotational motion and torque and transfers it to the drive shaft. As the drive shaft rotates, the cardan joint allows for the changes in angle and misalignment between the engine and the wheels or driven components. This flexibility of the cardan joint ensures that the drive shaft can operate smoothly and transmit power effectively, even when the components are not perfectly aligned or when there are variations in the angles.

At the other end of the drive shaft, another cardan joint is present to connect the drive shaft to the wheels or driven components. This cardan joint receives the rotational motion and torque from the drive shaft and transfers it to the wheels or driven components, allowing them to rotate and perform their intended functions.

The cardan joint in the drive shaft effectively compensates for misalignment, changes in angles, and variations in distance between the engine and the wheels or driven components. It ensures that the rotational motion and torque generated by the engine can be transmitted smoothly and efficiently to propel the vehicle or operate the machinery.

Overall, the purpose of the cardan joint in a drive shaft is to provide flexibility and accommodate misalignment, allowing for the effective transmission of rotational motion and torque between the engine or power source and the wheels or driven components.

China Professional ISO, DIN ISO Approved Ccr or Private Label Cardan Shaft Transmission Joint  China Professional ISO, DIN ISO Approved Ccr or Private Label Cardan Shaft Transmission Joint
editor by CX 2024-05-13