Product Description
Factory Customized For CHINAMFG HOWO/Steyr Foton-Auman Truck Parts Automobile Cardan Cross Shaft Universal Joint 991.1431.0082
Helpful Links
For instant communication, please click here
For our catalogs, please click here
For our home page, please click here
(1) The universal joint material 40Cr 40C is an alloy structural steel that has excellent comprehensive mechanical properties after quenching and tempering.
(2) The internal roller needle of the universal joint is made of high-quality bearing steel, which increases its wear resistance and greatly increases its service life.
(3) The parts have been filled with butter at the factory to increase their rotational flexibility.
(4) The product is shipped out individually and undergoes multiple inspection procedures to ensure smooth and stable loading.
More Products
| Truck Model | Sinotruk, Shacman, CHINAMFG Auman, CHINAMFG Xihu (West Lake) Dis., Xihu (West Lake) Dis.feng, Xihu (West Lake) Dis.feng Liuqi Balong, North BENZ( BEIBEN), C&C, JAC, etc. | |
| Product catalogue | Axle | Wheel Assembly |
| Differential Assembly | ||
| Main Reducer Assembly | ||
| Inner Ring Gear& Bracket | ||
| Basin Angle Gear/ Bevel Gear | ||
| Axle Shaft/ Half Shaft & Through Shaft | ||
| Axle Housing& Axle Assembly | ||
| Steering knuckle & Front Axle | ||
| Gear | ||
| Brake Drum& Wheel Hub | ||
| Flange | ||
| Bearing | ||
| Main Reducer Housing | ||
| Oil Seal Seat | ||
| Nut& Shim Series | ||
| Brake Backing Plate | ||
| Chassis Support Products | Leaf Spring Bracket | |
| Drop Arm Series | ||
| Bracket Series | ||
| Leaf Spring Shackle Series | ||
| Balanced Suspension Series | Balance Shaft Assembly | |
| Balance Shaft Housing | ||
| Axle Spring Seat | ||
| Thrust Rod | ||
| Balance Shaft Parts | ||
| Shock Absorber Series | Shock Absorber | |
| Shock Absorbing Airbag | ||
| Steering System | Power Steering Pump | |
| Power Steering Gear | ||
| Rubber Products | Oil Seal | |
| Rubber Support | ||
| Thrust Rod Rubber Core | ||
| Truck Belt | ||
| Engine support | ||
| Other | ||
| Clutch Series | Clutch Pressure Plate | |
| Clutch Disc | ||
| Flywheel Assembly | ||
| Flywheel Ring Gear | ||
| Adjusting Arm Series | ||
Factory Show
Our factory is located in HangZhou, ZheJiang , China. The production workshop covers an area of 3,200 square meters, the assembly workshop covers an area of 2,200 square meters, and the warehouse covers an area of 3,800 square meters. We have a mature production system and product research and development capabilities, rich assembly experience, and advanced testing equipment. Provide you with competitive and high quality products.
Packaging & Shipping
FAQ
Q1. Are you a factory or trading company?
We are a factory integrating research, development, production and sales.
Q2. What are the advantages of your products?
We support product customization to meet customer needs for special products. We can strictly control the products from raw materials to production, processing, product quality inspection, delivery, packaging, etc., and provide customers with high-end products and the most advantageous prices.
Q3. How about products price?
We are a factory, all products are direct sale at factory price. For the same price, we will provide the best quality; for the same quality, we have the most advantageous price.
Q4. What is your terms of packing?
We have branded packaging and neutral packaging, and we can also do what you want with authorization. This is flexible.
Q5. How to guarantee your after-sales service?
Strict inspection during production, Strictly check the products before shipment to ensure our packaging in good condition. Track and receive feedback from customer regularly. Our products warranty is 365 days.
Each product provides quality assurance service. If there is a problem with the product within the warranty period, the customer can negotiate with us in detail about the related claims, and we will do our best to satisfy the customer.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Support |
|---|---|
| Warranty: | 12 Months |
| Condition: | New |
| Samples: |
US$ 5/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How does a cardan joint affect the overall efficiency of a system?
A cardan joint can have an impact on the overall efficiency of a system in several ways. While it offers the ability to transmit rotational motion between misaligned shafts, there are factors to consider that can affect the efficiency of the system. Here’s a detailed explanation of how a cardan joint can influence overall system efficiency:
- Power Transmission Efficiency: Cardan joints introduce mechanical connections and moving parts into the system, which can result in power losses due to friction, backlash, and misalignment. These losses can reduce the overall power transmission efficiency of the system. The efficiency can be further affected by the condition of the joint, such as wear, lubrication, and alignment. Regular maintenance, proper lubrication, and minimizing misalignment can help mitigate power losses and improve efficiency.
- Angular Limitations: Cardan joints have specific angular operating ranges within which they can effectively transmit power. Operating the joint beyond these limits can result in increased friction, binding, and reduced efficiency. It is important to ensure that the operating angles of the joint are within the manufacturer’s specified range to maintain optimal efficiency. In cases where large operating angles are required, alternative coupling mechanisms or constant velocity joints may be more efficient options.
- Vibration and Imbalance: Cardan joints introduce additional components and connections, which can contribute to increased vibration and imbalance in the system. Vibrations can result in energy losses and reduced efficiency. Imbalance can cause uneven loading on the connected components, leading to increased wear and decreased efficiency. Proper balancing of the joint and the connected components, as well as monitoring and addressing excessive vibrations, are important for maintaining system efficiency.
- Maintenance and Lubrication: The efficiency of a system utilizing a cardan joint can be influenced by the maintenance practices and lubrication of the joint. Insufficient or improper lubrication can increase friction and wear, leading to reduced efficiency. Regular maintenance, including lubrication, inspection for wear, and alignment checks, is essential for optimal joint performance and efficiency. Following the manufacturer’s recommendations and guidelines for maintenance can help ensure maximum efficiency.
- System Integration and Design: The overall efficiency of a system also depends on the integration and design considerations of the cardan joint. Proper alignment, minimizing misalignment, and optimizing the selection and sizing of the joint and connected components are crucial for achieving efficient power transmission. Careful system design, including the selection of appropriate shafts, bearings, and supporting structures, can contribute to minimizing energy losses and improving overall efficiency.
- Application-Specific Factors: The impact of a cardan joint on system efficiency can vary depending on the specific application and operating conditions. Factors such as load requirements, rotational speeds, operating environment, and duty cycles can influence the efficiency of the system. It is important to consider these application-specific factors and evaluate the suitability of a cardan joint in terms of its ability to meet the efficiency requirements of the system.
Considering these factors and implementing appropriate measures, such as regular maintenance, proper lubrication, alignment checks, and system optimization, can help mitigate the potential efficiency drawbacks of a cardan joint and ensure the optimal performance of the overall system.
What are the key design considerations for optimizing cardan joint performance?
Optimizing the performance of a cardan joint requires careful design considerations that take into account various factors influencing its functionality, durability, and efficiency. By addressing these key design considerations, the performance of the cardan joint can be enhanced. Here’s a detailed explanation:
1. Mechanical Load and Torque Requirements: Understand the mechanical load and torque requirements of the application in which the cardan joint will be used. This includes analyzing the magnitude, direction, and variability of the loads and torques that the joint will experience. Properly selecting the cardan joint’s size, material, and configuration based on these requirements is crucial for optimizing its performance.
2. Operating Speed and Angular Misalignment: Consider the operating speed and the expected angular misalignment between the input and output shafts. The design of the cardan joint should accommodate the required speed range and angular movements while maintaining smooth operation and torque transmission. Balancing the joint’s ability to handle misalignments with its rotational capabilities is essential for optimizing performance.
3. Material Selection: Choose appropriate materials for the cardan joint components based on factors such as strength, durability, and resistance to wear and corrosion. Consider the specific operating conditions, including temperature, humidity, and exposure to chemicals or contaminants. Selecting high-quality materials that can withstand the application’s demands is crucial for optimizing performance and longevity.
4. Critical Dimensions and Clearances: Pay attention to critical dimensions and clearances within the cardan joint design. These include the size and geometry of the joint’s components, as well as the clearances between them. Properly dimensioning these aspects ensures sufficient strength, flexibility, and clearance for smooth operation and efficient torque transmission.
5. Lubrication and Sealing: Implement effective lubrication and sealing mechanisms to minimize friction, wear, and the ingress of contaminants. Proper lubrication ensures smooth operation and reduces power losses due to friction. Sealing the joint against dust, moisture, and other environmental factors helps maintain its performance and extend its lifespan.
6. Bearing and Bushing Design: Consider the design and selection of bearings or bushings used within the cardan joint. These components play a crucial role in supporting the joint’s rotational movement and transferring torque. Proper bearing or bushing selection, based on load capacity, lubrication requirements, and expected lifespan, is essential for optimizing the joint’s performance and reducing wear.
7. Structural Integrity and Rigidity: Ensure that the cardan joint assembly is structurally sound and rigid. Adequate stiffness and strength prevent excessive deflection and deformation during operation, leading to improved torque transmission efficiency and reduced wear on the joint and connected components.
8. Manufacturability and Quality Control: Consider manufacturability aspects during the design phase to ensure that the cardan joint can be produced consistently and cost-effectively. Implement quality control measures to verify dimensional accuracy, material quality, and functional performance of the manufactured joints, ensuring that they meet the required specifications and performance criteria.
9. Environmental Factors: Take into account environmental factors such as temperature variations, humidity, presence of corrosive agents, or exposure to vibrations. Design the cardan joint to withstand these conditions and incorporate appropriate protective measures or materials to ensure long-term performance and reliability.
10. Maintenance and Serviceability: Consider ease of maintenance and serviceability when designing the cardan joint. Provide access to lubrication points, inspection areas, and potential wear points for efficient maintenance activities. Designing for easy disassembly and replacement of worn components can minimize downtime and extend the joint’s lifespan.
By carefully addressing these key design considerations, the performance of a cardan joint can be optimized, resulting in improved torque transmission, durability, and overall efficiency. It is important to evaluate the specific requirements of the application and consult with experienced engineers or designers specializing in drivetrain systems to ensure the best design practices are followed.
Can you explain the purpose of a cardan joint in a drive shaft?
A cardan joint, also known as a universal joint or U-joint, serves a crucial purpose in a drive shaft. The drive shaft is responsible for transmitting rotational motion and torque from the engine or power source to the wheels or driven components. Here’s a detailed explanation of the purpose of a cardan joint in a drive shaft:
A drive shaft is a mechanical component that connects the output of the engine or power source to the wheels or driven components of a vehicle or machinery. It is typically a tubular shaft that rotates at high speeds and transmits the torque generated by the engine to propel the vehicle or operate the machinery. The drive shaft needs to accommodate various factors, including changes in distance, misalignment, and different angles between the engine and the wheels or driven components.
This is where the cardan joint comes into play. The cardan joint is located at each end of the drive shaft, connecting it to the engine or power source and the wheels or driven components. The purpose of the cardan joint is to allow the drive shaft to transmit rotational motion and torque while accommodating the misalignment and changes in angles that occur between these components.
When the engine or power source rotates, it generates rotational motion and torque. The cardan joint at the engine end of the drive shaft receives this rotational motion and torque and transfers it to the drive shaft. As the drive shaft rotates, the cardan joint allows for the changes in angle and misalignment between the engine and the wheels or driven components. This flexibility of the cardan joint ensures that the drive shaft can operate smoothly and transmit power effectively, even when the components are not perfectly aligned or when there are variations in the angles.
At the other end of the drive shaft, another cardan joint is present to connect the drive shaft to the wheels or driven components. This cardan joint receives the rotational motion and torque from the drive shaft and transfers it to the wheels or driven components, allowing them to rotate and perform their intended functions.
The cardan joint in the drive shaft effectively compensates for misalignment, changes in angles, and variations in distance between the engine and the wheels or driven components. It ensures that the rotational motion and torque generated by the engine can be transmitted smoothly and efficiently to propel the vehicle or operate the machinery.
Overall, the purpose of the cardan joint in a drive shaft is to provide flexibility and accommodate misalignment, allowing for the effective transmission of rotational motion and torque between the engine or power source and the wheels or driven components.
editor by CX 2024-05-17