Product Description

Automobile Repair Kit Spare Parts Universal Joint Cross Bearings GUA4 22×54.80 for Chery/Ford/GMC/Nissan/Toyota/Suzuki/Honda

Bearing Description

Universal Joints Bearing Introduction

A universal joint bearing(universal coupling, U-joint, Spicer or Hardy Spicer joint, Cardan joint, or Hooke’s joint) is a kind of bearing composed of cross/coupling/spider and 4 4 grease-filled needle roller bearings.It is commonly used with shafts that transmit rotary motion.It can transmit large torque at low friction.

Universal joint bearings are for use in various types of application. They are used in the automotive industry, for joints in commercial vehicle propeller shafts, and also in other industries, for special applications.

Guomai Bearing could offer universal bearings in a variety of sizes and dimensions in order to match with different types of heavy and light vehicles. High grade raw material is used to manufacture our roller bearings. 
Advantages of Universal Joint Bearings
* Low side thrust on bearings
* Large angular displacements are possible
* High torsional stiffness
* High torque capacity

Bearing Specification

Specification for Universal Joint Cross Bearings

Bearing Designation	Cap Diameter(D)			Total Length(L)
	mm
XQ120	16			40
EQ153	18			47
20*50	20			50
22*55	22			55
EQ140	39			118
CA6350	25			63
BJ212	30			88.2
NJ130	35			98
NJ131	35			98
131(5 oilhole)	35			98
140(5 oilhole)	39			118
1160K2(5 oilhole)	48			127
EQ153	47			140
153-1	47			140

For more bearing information/spec, please click here.

Bearing Detailed Photos

More Universal Joint Bearing 30×82 Pictures

Reasons to Choose Us ?

Reasons to choose CZPT Bearings as your China universal joint bearings partner

1. Bearing designing: Guomai has our own bearing R&D team and adopts Germany technology. This enables us to provide OEM and ODM service to you.
2. Production process: We strictly follow the 5S production process and acquired ISO9001:2008 quality management system certificate. Besides, we introduced from abroad world famous brands lathes and heat treatment equipment, this enables us to provide high precision bearings with similar quality to world famous brands such as SKF,TIMKEN,NSK,NTN,KOYO,NACHI and so on.
3. Materials: To ensure the high quality of bearings, we use high carbon chrome bearing steel which provides high rigidity, and high resistance to CZPT wear to produce the bearings. Low carbon cold rolled steel and low carbon stainless steel is also used according to customers’ requirements.
4. Quality inspection: All bearings will be strictly tested before packing. We have CZPT talysurf, hardness meter,clearance detector,vibration(speed) measuring instrument,roundness instrument to guarantee all bearings are qualified with the standards.
5. Lubricants: Suitable lubricants are used to protect the bearings from oxidation or corrosion of parts thus enable our bearings with longer lifetime, low noise and better high temperature performance. Selection of lubricants is generally governed by the bearing application. Right choice of high quality lubricants could prevent metal to metal contact and conduct heat away from the bearings.
6. Packing: Guomai bearings pay attention to every detail in the bearing production process. We adopt plastic bag, Kraft paper, thick paper box and cartons to protect the bearings from unexpectable damage during the transportation and warehouse stock.
7. Factory direct marketing: We are the factory and not the distributor or trading agent, so we could provide the same quality with competitive price.

About ZheJiang CZPT Bearing

About CZPT Bearing Factory

ZheJiang CZPT Bearing Co.,Ltd(hereinafter referred to as Guomai) was established in 1999, with more than 20 years of bearing research and manufacturing experience. The factory covers an area of 16000 square meters,7000 of which is manufacturing area and the other is office and warehouse. CZPT has large stock for normally used bearing models and this enables us to deliver the bearing to customers within the shortest time.

There are total 160 staffs, 6 automatic bearing assembly lines,116 CNC machines and 22 sets of precise inspection instruments. We not only have our own R&D team but also cooperate with ZheJiang University of Science and Technology, HangZhou Bearing Research Institute to develop new bearing designing and manufacturing technology.

In addition to conventional bearings, CZPT also provides OEM and ODM service to our respectable customers to meet their individual requirements.We introduced advanced milling, turning machines, heat treatment equipment and bearing testing machines to guarantee the quality of the bearings because we know “Quality is the life of Guomai” .Now our top products include taper roller bearing, angular contact ball bearing, deep groove bearing ,spherical bearing and cylindrical roller bearing with P5, P4 accuracy grade.

After so many years of developing, CZPT has built up an excellent sales network within China. Our 2 bearing brands “CVZ” and “Bentu” are well known and have high reputation within the industrial equipment and components field. Moreover, with confidence of our bearing quality, we started to export our bearings 4 years ago. Customers from Europe, North America, Middle East, Southeast Asia and Africa have enjoyed the happiness our bearings brought to them.

Guomai Bearing always upholds “WIN-WIN” spirit and believes in “Details determine success” philosophy, and keep improving bearing quality in the past 20 years. Some series of our bearings have similar quality with SKF, NSK, Timken, NACHI, KOYO, CZPT and other world famous brands but with lower price.

Looking to the future, CZPT will insist on the technology innovation and processing levels to provide the most appropriate bearing products and service to our customers. Bearing web page description and models may be limited, please contact us for more information.

Guomai Featured Bearings

Our Other Featured Bearings

Workshop

International Trade Show

We attend exhibitions abroad to let more customers know us well

Guomai Bearings, Turn Together with the World and You!!!

Packaging and Shipping

 

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in 4 different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right 1 for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting 1 or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is 1 of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least 1 ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to 1 another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the 2 shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has 2 groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other 2 pressure angles. It is often used when the splined shaft material is harder than usual.