Product Description
SWP-D Type No Telescopic Long Universal Coupling Flexible Cardan Shaft Universal Joint
Description:
The SWP-D long non bending universal joint coupling is a universal joint designed specifically for applications with long distances between 2 shafts. It is a double joint universal joint, which means it can work at an angle of 90 degrees. The “long” CHINAMFG indicates that the main body of the joint is longer than the standard SWP-D universal coupling, which allows it to adapt to more bending in the transmission system. The ‘no flexibility’ CHINAMFG indicates that the joint does not have a flexible coupling, which makes it harder and less susceptible to vibration. SWP-D long flexible universal joint couplings are commonly used in agricultural, construction, and mining equipment. It is also used in some automotive applications, such as transmission shafts and transfer boxes. The following are some characteristics of the SWP-D long flexible universal joint coupling: Double joint design, with a working angle of up to 90 degrees Extending the body to make the powertrain system more flexible No flexible coupling, with rigidity and vibration resistance Used in agriculture, construction, mining, and automotive applications
Advantages:
The SWP-D long flexible universal joint coupling has many advantages, including: 1. Can adapt to long distances between 2 shafts: The long body of the joint allows SWP-D to be long without flexible universal joint couplings, in order to adapt to more flexibility in the transmission system, which is very important for applications where 2 shafts are far apart. 2. Operable at angles up to 90 degrees: The double joint design of the SWP-D long flexible universal joint coupling allows it to operate at angles up to 90%, which is crucial for applications where 2 shafts are misaligned. 3. More rigid and less susceptible to vibration: SWP-D lacks flexible couplings, and the long-term absence of flexible universal joint couplings makes it more rigid and less susceptible to vibration. This is very important for applications where the transmission system is subjected to high vibration loads. 4. Durability and Durability: The SWP-D long non bending universal joint coupling is made of high-quality materials and designed for durability and durability. 5. Reducing noise and vibration: The rigid design of the SWP-D long flexible universal joint coupling helps to reduce noise and vibration in the transmission system. 6. Improving efficiency: The SWP-D long flexible universal joint coupling helps to improve the efficiency of the transmission system by reducing power loss. 7. Improving safety: The SWP-D long flexible universal joint coupling helps to improve safety by reducing the risk of transmission system failures.
Paramters:
Packing & shipping:
1 Prevent from damage.
2. As customers’ requirements, in perfect condition.
3. Delivery : As per contract delivery on time
4. Shipping : As per client request. We can accept CIF, Door to Door etc. or client authorized agent we supply all the necessary assistant.
FAQ:
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks in PDF or AI format.
Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 5: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.
Q 6: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | Standard |
|---|---|
| Shaft Hole: | 19-32 |
| Torque: | >80N.M |
| Bore Diameter: | 19mm |
| Speed: | 4000r/M |
| Structure: | Rigid |
| Customization: |
Available
| Customized Request |
|---|
Are cardan joints suitable for both high-torque and high-speed applications?
Cardan joints can be used in a variety of applications, but their suitability for high-torque and high-speed applications depends on several factors. Here’s a detailed explanation of the considerations regarding the use of cardan joints in such scenarios:
1. High-Torque Applications: Cardan joints are generally well-suited for high-torque applications. The design of the joint allows for the transmission of significant torque between misaligned shafts. However, it is important to consider the specific torque requirements and operating conditions. Factors such as the size and type of the joint, the material used, and the application’s torque demands should be taken into account. In extremely high-torque applications, alternative coupling mechanisms such as gear couplings or universal joints may be more appropriate.
2. High-Speed Applications: While cardan joints can operate at relatively high speeds, there are some limitations to consider. At high rotational speeds, cardan joints can experience increased vibration, imbalance, and potential for fatigue failure. The rotating components of the joint can generate centrifugal forces, which can impact the balance and stability of the system. To mitigate these issues, careful design considerations, including balancing and vibration analysis, may be necessary. In some cases, alternative coupling mechanisms like flexible couplings or constant velocity joints may be better suited for high-speed applications.
3. Balancing and Vibration Control: Balancing the rotating components, such as the driveshaft and the joint itself, is essential for minimizing vibration issues in high-torque and high-speed applications. Imbalance can lead to increased vibrations, reduced efficiency, and potential damage to the joint and other system components. Proper balancing techniques, including dynamic balancing during manufacturing or precision balancing during installation, can help achieve smoother operation and minimize vibration problems.
4. Material Selection: The material used in the construction of the cardan joint plays a crucial role in its suitability for high-torque and high-speed applications. High-strength materials, such as alloy steels, are often preferred for their ability to handle increased torque loads. Additionally, materials with good fatigue resistance and high-speed capabilities can help ensure the durability and reliability of the joint in demanding applications.
5. Application-Specific Factors: The suitability of cardan joints for high-torque and high-speed applications also depends on the specific requirements and operating conditions of the application. Factors such as load characteristics, duty cycles, temperature, and environmental conditions should be considered. It is important to consult with the manufacturer or engineering experts to determine the appropriate size, type, and configuration of the cardan joint for a particular high-torque or high-speed application.
In summary, cardan joints can be suitable for both high-torque and high-speed applications, but careful consideration of factors such as torque requirements, speed limitations, balancing, material selection, and application-specific conditions is necessary. Evaluating these factors and consulting with experts can help determine the optimal coupling solution for a given high-torque or high-speed application.
How do you calculate the efficiency of a cardan joint assembly?
Calculating the efficiency of a cardan joint assembly involves evaluating the power loss in the joint and comparing it to the input power. Efficiency is typically expressed as a percentage and provides an indication of how effectively the cardan joint transfers power from the input shaft to the output shaft. Here’s a detailed explanation:
To calculate the efficiency of a cardan joint assembly, follow these steps:
1. Measure Input Power: Determine the power being supplied to the cardan joint assembly. This can be measured using appropriate instruments such as a dynamometer or by utilizing the known power rating of the input source.
2. Measure Output Power: Measure the power being delivered by the output shaft of the cardan joint assembly. This can be done using a dynamometer or by utilizing the known power rating of the output device or load.
3. Calculate Power Loss: Calculate the power loss in the cardan joint assembly by subtracting the output power from the input power. The power loss represents the amount of power dissipated or wasted within the joint.
Power Loss = Input Power – Output Power
4. Calculate Efficiency: Divide the output power by the input power and multiply the result by 100 to obtain the efficiency as a percentage.
Efficiency = (Output Power / Input Power) * 100
The efficiency of the cardan joint assembly can be interpreted as the percentage of input power that is effectively transmitted to the output shaft. A higher efficiency indicates a more efficient power transfer, while a lower efficiency suggests a higher level of power loss within the joint.
It’s important to note that the efficiency of a cardan joint assembly can be influenced by various factors, including misalignments, lubrication conditions, wear, and operating speeds. Additionally, the efficiency may vary at different operating conditions and under varying loads. Therefore, it is advisable to perform efficiency calculations under representative operating conditions and consider the specific characteristics of the cardan joint assembly being analyzed.
By calculating the efficiency, engineers and designers can assess the performance of the cardan joint assembly, identify potential areas for improvement, and optimize the power transmission system for enhanced efficiency and overall effectiveness.
How do you choose the right size cardan joint for your application?
Choosing the right size cardan joint for your application is crucial to ensure optimal performance, reliability, and longevity. Several factors need to be considered when selecting the appropriate size of a cardan joint. Here’s a detailed explanation of the key considerations:
- Load Capacity: Determine the maximum load that the cardan joint will need to transmit. Consider both the torque (rotational force) and the axial load (thrust) that will be applied to the joint. The load capacity of the cardan joint should exceed the maximum expected loads in your application to ensure safe and reliable operation.
- Operating Speed: Consider the rotational speed at which the cardan joint will be operating. Higher speeds may require specific design considerations, such as balancing, lubrication, and material selection, to ensure smooth operation and avoid premature wear or failure. Verify that the selected cardan joint is rated for the intended operating speed range.
- Shaft Diameter: Measure the diameter of the input and output shafts that will be connected by the cardan joint. The cardan joint should have yokes and bearings that match the shaft diameter to ensure a proper fit and reliable power transmission. It is essential to consider both shaft diameters when selecting a cardan joint.
- Misalignment Angle: Determine the maximum expected misalignment angle between the input and output shafts. Different types of cardan joints have different capabilities to accommodate misalignment. Consider the angular misalignment and choose a cardan joint that can handle the required range of misalignment angles in your application.
- Environmental Factors: Evaluate the operating environment of the cardan joint. Consider factors such as temperature, humidity, dust, chemicals, and vibration. Choose a cardan joint that is suitable for the specific environmental conditions to ensure proper functioning and longevity.
- Service Life and Maintenance: Consider the expected service life of the cardan joint and the maintenance requirements. Some applications may require frequent maintenance or periodic lubrication of the joint. Evaluate the ease of maintenance and factor it into your selection process.
- Standards and Regulations: Depending on your industry or application, there may be specific standards or regulations that dictate the requirements for cardan joints. Ensure that the selected cardan joint complies with the relevant standards and regulations for your application.
It is advisable to consult with a knowledgeable supplier or engineer specializing in power transmission components to assist you in selecting the right size cardan joint for your specific application. They can consider all the relevant factors and provide guidance to ensure optimal performance and reliability of the cardan joint in your application.
editor by CX 2024-04-04